注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

意寓云天的博客

平静的湖面只有呆板的倒影,奔腾的激流才有美丽的浪花!

 
 
 

日志

 
 

我的sony sz22换硬盘全过程  

2007-08-10 00:33:01|  分类: 硬件技术 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |

Setup

We used the VAIO VGN-SZ260P, which is the Premium model that uses a Carbon Fiber LCD lid, however this guide applies to all other SZ models as well. In this guide, we replace the stock Toshiba 120GB hard drive with 5400RPM with a speedier 2.5-inch Seagate 100GB hard drive with 7200RPM. Keep in mind you need a Serial ATA hard drive, the regular old Parallel ATA drives aren’t supported on the VAIO SZ series.

我的sony sz22换硬盘全过程 - lanyaochun - 意寓云天的博客

The only tool required for this project is a Philips screw driver. Let’s get started!

Step 1 - Remove Screws

Flip the entire laptop over and remove the battery.

我的sony sz22换硬盘全过程 - lanyaochun - 意寓云天的博客

Enlarge Image

There are a total of 4 screws you need to remove as depicted in the red circles.

我的sony sz22换硬盘全过程 - lanyaochun - 意寓云天的博客

Begin removing one at a time.

 我的sony sz22换硬盘全过程 - lanyaochun - 意寓云天的博客

Step 2 - Removing the Keyboard

After you remove the four screws from the bottom chassis, flip the laptop over and take a look at the keyboard area.

Now look carefully at the top corners of the keyboard, there is a tiny little button that you need to push in order to release the keyboard.

我的sony sz22换硬盘全过程 - lanyaochun - 意寓云天的博客

Push it inwards with your screw driver or finger.

我的sony sz22换硬盘全过程 - lanyaochun - 意寓云天的博客

Push both the release keys while pulling the entire keyboard towards you.

我的sony sz22换硬盘全过程 - lanyaochun - 意寓云天的博客

Gently lift up the keyboard towards you, while flipping it over.

我的sony sz22换硬盘全过程 - lanyaochun - 意寓云天的博客

The keyboard has been removed!

 

Step 3 - Removing the Palmrest

Looking inside, you will need to remove three screws as depicted in the red circles below.

我的sony sz22换硬盘全过程 - lanyaochun - 意寓云天的博客

Next, gently slide the entire palm rest chassis towards you.

我的sony sz22换硬盘全过程 - lanyaochun - 意寓云天的博客

Before you lift the palm rest, notice the delicate ribbon cable on the underside. Then lift it upwards, flipping it over. Be careful not to rip the ribbon cable that’s connected!

我的sony sz22换硬盘全过程 - lanyaochun - 意寓云天的博客

You now have access to the hard drive!

Step 4 - Removing the Hard Drive

Remove three screws from the cage holding the hard drive as depicted below in the red circles.

我的sony sz22换硬盘全过程 - lanyaochun - 意寓云天的博客

Next, gently remove the SATA cable from the hard drive. It may require a bit of effort to pull the SATA cable from the hard drive, just try to be gentle. Note that there is tape over the SATA cable underneath the hard drive making the SATA cable more difficult to pull out.

我的sony sz22换硬盘全过程 - lanyaochun - 意寓云天的博客

Be careful in this step not to rip the ribbon.

我的sony sz22换硬盘全过程 - lanyaochun - 意寓云天的博客

The hard drive is now removed!

The next step is to just remove the stock hard drive from its cage be removing the screws on the edges and replace it with the hard drive of your choice. Carefully screw it all back in place, slide the keyboard back in and power on your system!

我的sony sz22换硬盘全过程 - lanyaochun - 意寓云天的博客

Replacing Toshiba 120GB hard drive 5400RPM with Seagate 100GB 7200RPM 2.5” Hard Drive.

Enter the BIOS by pushing on F2 key during the VAIO boot screen. Ensure the proper hard drive is listed in the BIOS.

我的sony sz22换硬盘全过程 - lanyaochun - 意寓云天的博客

Insert your Windows XP or Recovery DVD disc to begin installing the operating system!

Enjoy the extra 7200RPM performance boost! To see which drives perform the best, check out our hard drive reviews. Discuss in our forums if you have questions!

  评论这张
 
阅读(723)| 评论(0)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2017